Emerald EP-SA-CONT-RF Wireless Smoke Alarm Controller

Description

The Emerald EP-SA-CONT-RF lets you test, silence and locate triggered compatible smoke alarms without reaching the ceiling. Dedicated controls and alarm indicators make routine checks easier from a wall-mounted controller.

Key features

• Test connected alarms for seven seconds.
• Locate the triggered alarm by silencing the other connected alarms.
• Silence connected alarms for approximately eight minutes.
• Red alarm indicator and yellow low-battery indicator.
• Replaceable CR2450 battery with a stated three-year life.

Technical specifications

Brand	Emerald
Model	EP-SA-CONT-RF
Power supply	Replaceable CR2450 battery
Battery design life	3 years
Radio frequency	433 MHz
Controls	Test; locate; silence
Mounting	Wall; recommended 1.4 m above floor
Operating temperature	0°C to 40°C
RF standard stated in supplied document	AS 4268
EMC standards stated in supplied document	EN 301 489-1; EN 301 489-3
Manufacturer warranty	3 years from purchase; conditions apply

Installation and compatibility

The supplied controller manual lists RF Ranger alarms and Vulcan alarms fitted with an RF module. The supplied EVO datasheets also list this controller as compatible.

Wireless range depends on the building and obstructions. Pair only compatible devices and follow the installation instructions for every device in the network.

Contains a replaceable coin/button battery. Keep new and used batteries away from children. Swallowing a battery can cause severe injury or death; seek immediate medical attention if ingestion is suspected.

Contact Smoke Alarm Services to discuss this product and the right setup for your property.