Emerald EVO24010H Hybrid Photoelectric Smoke Alarm with 10-Year Battery

Description

The Emerald EVO24010H can operate from 240 V AC mains with a sealed 10-year lithium backup battery, or from the sealed battery as its primary power source. It combines photoelectric split-spectrum detection with EchoTag diagnostics and optional wireless interconnection.

Key features

• Photoelectric optical chamber with advanced split-spectrum technology.
• EchoTag diagnostic data download through the EchoTag app.
• E-Memory records the last alarm event.
• Test/hush control with approximately eight minutes of alarm hush.
• Low-battery and fault warning can be temporarily silenced for approximately ten hours.
• Mounting plate and screw pack supplied.
• Hardwired interconnection with up to 24 compatible Emerald 240 V alarms.
• Optional EVOMOD RF module connects up to 40 compatible Emerald RF-enabled alarms; sold separately.
• Stainless steel mesh helps protect the chamber from insects, dust and humidity.

Technical specifications

Brand	Emerald
Model	EVO24010H
Power supply	240 V AC with battery backup; or sealed battery operation
Battery	10-year non-replaceable 3 V lithium
Interconnection	Wired: up to 24; RF with optional EVOMOD: up to 40 compatible alarms
Dimensions	139 mm diameter × 48 mm
Product weight	268.3 g
Detection technology	Photoelectric; advanced split-spectrum
Alarm volume	Greater than 85 dB(A) at 3 m
Hush time	Approximately 8 minutes
Mounting	Ceiling or wall
Operating temperature	0°C to 40°C
Operating humidity	Up to 93% RH (non-condensing)
Standards stated in datasheet	AS 3786:2014; AS 3786:2023
Manufacturer warranty	10 years; conditions apply

Installation and compatibility

Mains wiring requires installation by a qualified electrician. Follow the manufacturer’s installation and testing instructions.

Wireless operation requires the EVOMOD module specified in the EVO datasheet. The EP-VC-RF-MOD is a separate hybrid-alarm accessory and must not be assumed interchangeable.

Supports compatible Emerald RF alarms, SafeLink and the EP-SA-CONT-RF controller when configured with the required RF module. Do not combine wired and RF networks without checking the installation manual.

Wireless range depends on the building and obstructions. Pair only compatible devices and follow the installation instructions for every device in the network.

Contact Smoke Alarm Services to discuss this product and the right setup for your property.