Red Professional RACP Wireless Smoke Alarm Wall Controller

Description

The Red Professional RACP provides wall-mounted control of compatible Red wireless smoke alarms. Test the network, locate a triggered alarm, hush or silence alarms and activate alarm memory without reaching the ceiling.

Key features

• Built-in RF with support for up to 40 compatible devices.
• Replaceable CR2450 lithium battery with a stated two-year life.
• Dedicated test, locate, hush/silence and Memory D controls.
• Status indicators identify operating modes.
• Wall mounting using screws or adhesive.

Technical specifications

Brand	Red Smoke Alarms
Model	RACP
Power supply	Replaceable 3 V lithium battery (CR2450)
Battery life stated in datasheet	2 years
Radio frequency	433.92 MHz
Network capacity	Up to 40 compatible devices; connected-device limits apply
Wireless range	30 m indoors in line of sight; 100 m in free field
Controller dimensions	40 × 90 × 18 mm (specification table)
Mounting base dimensions	80 × 120 × 15 mm
Mounting	Indoor; wall; screws or adhesive
Operating temperature	0°C to 40°C
Operating humidity	15% to 95% RH (non-condensing)
Standards stated in datasheet	AS/NZS 4268:2017 Amd 1:2021; AS/NZS 62368.1:2022; AS/NZS 2772.2:2015 Amd 1:2018
Manufacturer warranty	3 years; conditions apply

Installation and compatibility

Listed compatible devices: R10RF and R10RFP; R240 and R240RC with RWB2; RFMDUAL, R240P, RSDUALP and RSDUALPB with RFMOD. Modules and bases are model-specific.

Wireless range depends on the building and obstructions. Pair only compatible devices and follow the installation instructions for every device in the network.

Contains a replaceable coin/button battery. Keep new and used batteries away from children. Swallowing a battery can cause severe injury or death; seek immediate medical attention if ingestion is suspected.

Contact Smoke Alarm Services to discuss this product and the right setup for your property.